Commell LP-172 Manuale Utente

LP-172 Pico-ITX User’s Manual 2014/3/14 Version:1.7

LP-172 User’s Manual -9- 1.3 <Mechanical Drawing>

LP-172 User’s Manual -10- W83627DHG-P DDR3 SO-DIMM 4GB max. 1.4 <Block Diagram> CRT / LVDS 2 x Serial Port PS2 KB/MS

LP-172 User’s Manual -11- CN_LPC CN AUDIOCN_USB2 CN_USB1 Chapter 2 <Hardware Setup> 2.1 <Connector Location> CN_SATA CN

LP-172 User’s Manual -12- RJ45 PS2 CRT CN_INV DC_OUT SO-DIMM LP-172

LP-172 User’s Manual -13- JAT 2.2 <Jumper Reference> Jumper Function JRTC CMOS Operating/Clear Setting JAT AT/ATX Mode Setting JVLCD LCD Pa

LP-172 User’s Manual -14- 2.3 <Connector Reference> 2.3.1 <Internal Connector> Connector Function Remark SO-DIMM 204 -pin DDR3 SO-DIMM

LP-172 User’s Manual -15- 2.4 <Memory Setup> Non-ECC, unbuffered memory is supported only. The board provides one 204-pin DDR3 SO-DIMM to suppor

LP-172 User’s Manual -16- JAT 2.5 <CMOS & ATX Setup> The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to in

LP-172 User’s Manual -17- 2.6 <SATA Interface> Based on Intel NM10, the board provides one Serial ATAII interfaces with up to 300MB/s of transfe

LP-172 User’s Manual -18- 2.7 <LAN Interface> The Intel® 82583V supports triple speed of 10/100/1000Base-T, with IEEE802.3 compliance and Wake-O

LP-172 User’s Manual -1- Copyright Copyright 2012. All rights reserved. This document is copyrighted and all rights are reserved. The information i

LP-172 User’s Manual -19- 2.8 <Onboard Display Interface> Based on Intel Atom CedarTrail Processor chipset with built-in Intel® integrated extre

LP-172 User’s Manual -20- 2.8.2 <CN_LVDS> The board provides one 20-pin LVDS connector for 18 bit or 24bit single channel panel, with one LCD

LP-172 User’s Manual -21- Connector: CN_INV Type: 5-pin Inverter power connector Connector model: molex_53261-5pin or compatible Pin Desc

LP-172 User’s Manual -22- To setup the LCD, you need the component below: 1. A panel with LVDS interfaces. 2. An inverter for panel’s backlight powe

LP-172 User’s Manual -23- After setup the devices well, you need to select the LCD panel type in the BIOS. The panel type mapping is list below: LP-1

LP-172 User’s Manual -24- CN_AUDIO2 101 92.9 <Onboard Audio Interface> The board provides the onboard high definition audio with Realt

LP-172 User’s Manual -25- CN_USB2 CN_USB1 2 102.10 <USB2.0 Interface> Based on Intel® NM10 FCH, the board provides 4 USB2.0 ports. The USB

LP-172 User’s Manual -26- 2.11 <Serial Port Jumper Setting > The board provides two RS232 serial ports Connector: CN_COM1/2 Type: 20-pin (5 x 2

LP-172 User’s Manual -27- 2.12 <Power & FAN Connector > The board requires DC input with 2-pin header, the input voltage range is from 5V fo

LP-172 User’s Manual -28- 2.12.2 <Power Output> Connector: DC_OUT Type: 6-pin connector for +5V output Pin Description Pin Description Pin Des

LP-172 User’s Manual -2- Packing List: Please check the package content before you starting using the board. Hardware: LP-172 Pico-ITX Miniboard x 1 C

LP-172 User’s Manual -29- 2.12.3 <Fan Connector> Connector: SYSFAN Type: 3-pin fan wafer connector Connector model: 2001-WS-03-LF Connector: C

LP-172 User’s Manual -30- 2.13 <Indicator and Switch> The JFRNT provides front control panel of the board, such as power button, reset and beepe

LP-172 User’s Manual -31- (This Page is Left For Blank)

LP-172 User’s Manual -32- Chapter 3 <BIOS Setup> The motherboard uses the Phoenix BIOS for the system configuration. The Phoenix BIOS in the sin

LP-172 User’s Manual -33- (This Page is Left for Blank)

LP-172 User’s Manual -34- Appendix A <I/O Port Pin Assignment> A.1 <SATA Port> Connector: SATA Type: 10-pin header for SATA Port Pin De

LP-172 User’s Manual -35- A.4 <LAN LED Port> Connector: JSPD1 Type: 2-pin header for LAN Speed LED connector RJ45 connector with LED on rear pan

LP-172 User’s Manual -36- Appendix B <Flash BIOS> B.1 BIOS Auto Flash Tool The board is based on phoenix BIOS and can be updated easily by the B

LP-172 User’s Manual -37- Appendix C <System Resources> C.1 <I/O Port Address Map>

LP-172 User’s Manual -38-

LP-172 User’s Manual -3- Index Chapter 1 <Introduction>...6 1.1 <Product Overview&g

LP-172 User’s Manual -39- C.2 <Memory Address Map>

LP-172 User’s Manual -40- C.3 <System IRQ Resources>

LP-172 User’s Manual -41-

LP-172 User’s Manual -42-

LP-172 User’s Manual -43- Appendix D <Watch Dog timer Setting> The watchdog timer makes the system auto-reset while it stops to work for a perio

LP-172 User’s Manual -44- This Page is Left for Blank)

LP-172 User’s Manual -45- Contact Information Any advice or comment about our products and service, or anything we can help you please don’t hesitate

LP-172 User’s Manual -4- A.2 <CRT Port> ...34 A.3 <LAN

LP-172 User’s Manual -5- (This page is left for blank)

LP-172 User’s Manual -6- Chapter 1 <Introduction> 1.1 <Product Overview> LP-172 is the PICO-ITX miniboard with Intel® Atom™ CedarTrail Pro

LP-172 User’s Manual -7- 1.2 <Product Specification> General Specification Form Factor PICO-ITX miniboard CPU Intel® Atom™ CedarTrail Processor

LP-172 User’s Manual -8- Ordering Code LP-172D5 Support Intel® Atom™ CedarTrail D2550 processor with onboard VGA, 18 or 24 bit LVDS, Audio, Giga LAN,